|
Home
>
Journal Issues
>
¹ 1 (2017) Technical mechanics
>
5
___________________________________________________
UDC 629.7.036.54
Technical mechanics, 2017, 1, 47 - 56
EXPERIMANTAL INVESTIGATIONS INTO GAS FLOW IN PLANE MODEL OF
ROTARY DETONATION ROCKET ENGINE
DOI:
https://doi.org/10.15407/itm2017.01.047
S. S. Vasyliv, V. O. Grushko, M. YU. Pyasetskyi
S. S. Vasyliv
Institute of Technical Mechanics of the National Academy of Sciences of Ukraine and the State Space Agency of Ukraine
Ukraine
V. O. Grushko
Institute of Technical Mechanics of the National Academy of Sciences of Ukraine and the State Space Agency of Ukraine
Ukraine
M. YU. Pyasetskyi
Institute of Technical Mechanics of the National Academy of Sciences of Ukraine and the State Space Agency of Ukraine
Ukraine
The problem of a low specific pulse of the rotary detonation rocket engine described in the related literature
is examined. The research objective is to reveal the factors degrading the characteristics of the systems of this
type. It is assumed that due to the structure of propellant components flow in the zone of their mixing only the
portion detonates, and the rest reacts in the deflagration mode. To confirm the assumption under consideration,
the experimental investigations have been conducted. The test results are obtained using a plane model of the
rotary detonation rocket engine. The experimental test installation and the testing technique are described. The
patterns of isolines for static and total pressures, as well as the flow patterns are presented. From this information,
it can conclude that the flow is supersonic with complex vortices and shock waves. Although while interacting
with these flow elements the detonation wave propagates, but in so doing loses a share of energy, affecting the
specific pulse.
rotary detonation rocket engine, detonation wave, flow pattern, injector,
total and static pressures, visualization, black-oil coating.
1. Ivanov V. K., Kashkarov A. M., Romasenko Ye. N., Tolstikov L. A. Turbo-pump assemblies for liquid rocket engine developed by NPO Energomash. Konversyia v Mashinostroenii. 2006. No. 1. Pp. 1-6. (in Russian).
2. Bykovsky F. A., Zhdan S. A. Continuous Spin Detonation. Novosibirsk: Publishing House of Siberian Branch of RAS, 2013. 423 pp. (in Russian).
3. Pulse Detonation Engines. S. M. Frolov (Ed.). Moscow: TORUS PRESS, 2006. 592 pp. (in Russian).
4. Shank Jason C. Development and Testing of a Rotating Detonation Engine Run on Hydrogen and Air: Thesis presented to the Faculty Department of Aeronautics and Astronautics, Graduate School of Engineering and Management, Air Force Institute of Technology, Air University, Air Education and Training Command in partial fulfillment of the requirements for the Degree of Master of Science in Aeronautical Engineering. USAF. 2012. 70 ðp.
5. Russo Rachel M. Operational Characteristics of a Rotating Detonation Engine using Hydrogen and Air: Thesis presented to the Faculty Department of Aeronautics and Astronautics, Graduate School of Engineering and Management, Air Force Institute of Technology, Air University, Air Education and Training Command in Partial Fulfillment of the Requirements for the Degree of Master of Science in Aeronautical Engineering. USAF. 2011. 90 ðp.
6. James A. Suchocki Operational Space and Characterization of a Rotating Detonation Engine Using Hydrogen and Air: Thesis presented in partial fulfillment of the requirements for the Degree Master of Science in the Graduate School of the Ohio State University. The Ohio State University. 2012. 116 pð.
7. Chaplits A. D., Astapov A. I. Visualization of Gas Flows through Inner Channels. Dnipropetrovsk: ITM, NASU&NSAU, 2003. 412 pp. (in Russian).
8. Nettleton M. Gaseous Detonations. Translated from English. L. G. Gvozdeva (Ed.). Moscow: Mir, 1989. 280 pp. (in Russian).
9. Petunin A. N. Methods and Technique for Measuring Gas Flow Parameters. Moscow: Mashi-nostroyeniye, 1972. 332 pp. (in Russian).
10. Deych M. Ye. Engineering Gas Dynamics. Second edition revised. Moscow: Gosenergoizdat, 1961. 671 pp. (in Russian).
DOI:
https://doi.org/10.15407/itm2017.01.047
Copyright (©) 2017 S. S. Vasyliv, V. O. Grushko, M. YU. Pyasetskyi
Copyright © 2014-2018 Technical mechanics
____________________________________________________________________________________________________________________________
|
GUIDE FOR AUTHORS
|