TECHNICAL MECHANICS
ISSN (Print): 1561-9184, ISSN (Online): 2616-6380

HOME    ABOUT THIS JOURNAL    EDITORIAL BOARD    GUIDE FOR AUTHORS    CURRENT    JOURNAL ISSUES    CONTACTS

UDC 533.95

Technical mechanics, 2024, 4, 63 - 71

DRAG COEFFICIENTS OF SIMPLE-GEOMETRY ROUGH BODIES

Yurkov B. V., Voronovskyi D. K., Tokmak M. A., Nosikov S. V.

Yurkov B. V.
Institute of Technical Mechanics of the National Academy of Sciences of Ukraine and the State Space Agency of Ukraine

Voronovskyi D. K.
Institute of Technical Mechanics of the National Academy of Sciences of Ukraine and the State Space Agency of Ukraine

Tokmak M. A.
Institute of Technical Mechanics of the National Academy of Sciences of Ukraine and the State Space Agency of Ukraine

Nosikov S. V.
Institute of Technical Mechanics of the National Academy of Sciences of Ukraine and the State Space Agency of Ukraine

      This paper considers the effect of the surface roughness of Kapton-H polyimide, a typical structural material for the outer surfaces of spacecraft, on the drag coefficients of bodies with simple geometric shapes (a sphere, a cylinder, and a cone). Kapton-H is a benchmark material used in testing polymers for resistance to long-term exposure to the near-satellite environment. The Kapton-H roughness is low. However, during the operation in very low Earth orbits (VLEOs), the roughness of polymers significantly increases. When polymers interact with atoms and molecules of the near-satellite environment, their momentum and energy accommodation coefficients change. As a result, the spacecraft component drag coefficients change too.
      The need for studying the drag coefficients of rough bodies with simple geometric shapes stems from the current trends in space research, in particular the need for a long operation of spacecraft in VLEOs at altitudes from 170 km to 300 km, where spacecraft are exposed to hypersonic atomic oxygen (AO) flows with an annual fluence from 1?10?? atoms O/cm? to 1?10?? atoms O/cm?. These conditions significantly affect the service performance of spacecraft, especially those of the structural materials of their outer surfaces, among which polymers play an important role. Exposure to atomic oxygen degrades polymer materials, which manifests itself in changes in the surface structure, roughness, and erosion depth. This, in turn, leads to changes in the aerodynamic and thermal characteristics and the processes of polymer surface – AO interaction.
      In particular, changes in the surface roughness of materials change important parameters, such as the solar absorptance and the AO-to-surface momentum and energy transfer coefficients. At the same time, these coefficients depend on the AO fluence, the surface roughness, and the angle between the oxygen atom velocity and the normal to the body surface. All these factors govern changes in the thermal conditions and aerodynamic characteristics of spacecraft in VLEOs, which is crucial for a long-term spacecraft operation.
      Changes in the drag coefficients and thermal conditions of spacecraft surfaces affect the service life of spacecraft. The presented results are of practical importance in selecting polymer materials for spacecraft’s outer surfaces at the design stage.
     

drag force coefficients, polyimide, roughness, spacecraft

1. Zimcik D. G., Maag C. R. Results of apparent atomic oxygen reactions with spacecraft materials during Shuttle Flight STS-41G. J. Spacecraft and Rockets. 1988. V. 25. No. 2. P. 162. https://doi.org/10.2514/3.25965

2. Allegri G., Corradi S., Marchetti M., Milinchuk V.K. On the degradation of polymeric thin film in LEO space environment. In: Proceedings of the 9th International Symposium on Materials in a Space Environment, ESA SP-540. Netherlands. Noordwijk. 2003. P. 255.

3. Patent, International Publication Number, WO 2019/140219 A1. Atomic oxygen-resistant, low drag coatings and materials. Minton K, Schwartzentruber; Aplicant McAndrews, Held&Malloy, Ltd. -PCT/US2010/013230; International Filing Date 11 January 2019; International Publication Date 18 July 2019.

4. Shuvalov V. A., Gorev N. B., Kuchugurnyi Yu. P. Polyimide degradation under atomic oxygen attack. Acta Astronautica. 2023. V. 207. Pp. 118 - 128. https://doi.org/10.1016/j.actaastro.2023.03.002

5. Zhang Y., Wu H., Guo Y.-d., Yang Y.-b., Yu Q., Liu J.-g., Wu B.-h., Lv F.-z. Atomic oxygen-resistant polyimide composite films containing nanocaged polyhedral oligomeric silsesquioxane components in matrix and fillers. Nanomaterials. 2021. V. 11. No. 1. Pp. 141-146. https://doi.org/10.3390/nano11010141

6. Henri V., Dantras E., Lacabanne C., Dieudonne A. G., Koliatene F. Thermal ageing of PTFE in the melted state: Influence of interdiffusion on the physicochemical structure. Polymer Degradation and Stability. 2020. V. 171. Pp. 1-8. https://doi.org/10.1016/j.polymdegradstab.2019.109053

7. Kuryshev A. P., Filippov B. V. Aerodynamic coefficients of revolution bodies in a strongly rarefied plasma. In: Rarefied Gas Aerodynamics. Leningrad: Leningrad State University, 1969. Iss. 4. Pp. 142 -147. (in Russian).

8. Barantsev R. G. Rarefied Gas - Surface Interaction. Moscow: Nauka, 1975. 344 pp. (in Russian).

9. ECSS-10-04 A. Space Environment. - Issued 15 November 2009. - ESA-ESTEC, 2009. https://ecss.nl/standard/ecss-e-st-10-04c-space-environment/

Copyright (©) 2024 Yurkov B. V., Voronovskyi, D. K. Tokmak M. A., Nosikov S. V.

Copyright © 2014-2024 Technical mechanics